bicycle maintenance

Here is an important tip:
1 of the least expensive things on your bicycle can be replaced often and save you a bunch of money in the long ride. Why this concept hasn’t taken off more by now I do not know! What that concept is that if something were to wear out first – would you rather it be something very expensive or rather 1 of the most affordable components on your bike?

This is such a Great concept! It is your chain!
Yet most people do not realize this.

If you would Replace your chain annually, the gears that it runs on would last MUCH longer!!

Oddly, your chain is one of the least expensive parts of the drive train, and if you replace it often it can save you money because you will not have to replace your chain-rings and cassette as often! You see it is actually your chain that wears out first – due to all the links/joints in the chain. Then once the chain is worn out it wears out the cassette and chain-rings due to the stretched links in the chain.

A great and super easy way to measure your chain is to put your chain onto the big chainring and use a standard measuring tape to measure out the links. The pins in the links should measure up at the 0″ mark and the 12″ mark. Anything exceeding 1/4 (one quarter) of an inch is excessive chain wear, and should have already been replaced.

If you have excessive chain wear and replace your chain there is a good chance that you will have to replace other parts in the drive-train. What can happen is that the worn out parts may allow slipping when put under pressure.
For example, when standing on a steep climb your chain may suddenly skip a tooth on the cog.

So, depending on how much you ride, check your chain once or twice a year – replace as needed. It will save you money because your chain-rings and cogs last longer!

Be Sociable, Share!

Leave a Reply

Your email address will not be published. Required fields are marked *